A comprehensive range of radial probes for use with any Mercer or Tesa electronic gauge.
The most important part of any gauging system is the measuring transducer or probe.
Mercer Probe Type 491 Gauging Transducer
GT22 ±1mm with Vacuum Retract
◊ Total Tip Travel ⇒ 4.3mm
◊ Linearity error ⇒ 0.25% FS ± 1000 µm range (at 20 °C ± 1°C)
◊ Repeatability ⇒ 0.01µm
◊ Tip force ⇒ 0.63N
◊ 8mm body diameter with radial cable exit
◊ Robust construction with chrome plated hardened steel body
◊ Can be clamped over entire body length
◊ Fitted with Ø3mm tungsten carbide ball tip with M2.5mm thread
◊ Nitrile sealing boot
◊ IP65 protection
Mercer Probe Type 491 Gauging Transducer
Probe type T102F ±1mm without Vacuum Retract
◊ Total Tip Travel ⇒ 4.6mm
◊ Linearity error ⇒ 0.25% FS ± 1000 µm range (at 20 °C ± 1°C)
◊ Repeatability ⇒ 0.01µm
◊ Tip force ⇒ 0.63N
◊ 8mm body diameter with axial or radial cable exit
◊ Robust construction with hardened steel body
◊ Can be clamped over entire body length
◊ Fitted with Ø3mm tungsten carbide ball tip with M2.5mm thread
◊ Viton (FPM) sealing boot
◊ IP62 protection
Probe type T102P ±1mm Pneumatic Push
◊ Total Tip Travel ⇒ 4.3mm
◊ Linearity error ⇒ 0.25% FS ± 1000 µm range (at 20 °C ± 1°C)
◊ Repeatability ⇒ 0.01µm
◊ Pre-travel ⇒ adjustable
◊ Pressure Pmax ⇒ 1.5 bar
◊ 8mm body diameter with radial cable exit
◊ Robust construction with chrome plated hardened steel body
◊ Can be clamped over entire body length
◊ Fitted with Ø3mm tungsten carbide ball tip with M2.5mm thread
◊ Bellow ⇒ FPM / FKM
◊ IP62 protection
Mercer Probe type 451 ±0.5mm
◊ Short body length, 8mm body diameter with radial cable exit
◊ Designed for use in fixtures where space is limited
◊ Robust construction with chrome plated hardened steel body
◊ Can be clamped over entire body length
◊ Fitted with carbide ball bearing tip and Nitrile sealing boot
◊ IP62 protection