The most important part of any gauging system is the measuring transducer or probe.
A comprehensive range of standard probes for use with any Mercer or Tesa electronic gauges are available in two styles:
1) Axial - cable in line with the body 2) Radial - cable at right angles to the body
Standard probes operate on the principle of differential inductance (half-bridge), and are designed to suit most common applications.
Mercer Probe Type 490 Gauging Transducer
T101F
Key Features:
◊ Precision linear bearing
◊ Hardened steel body Ø8.0 mm
◊ Viton splash proof gaitor
◊ Removable tungsten carbide ball anvil tip
◊ Pre-travel adjustment
◊ Linearity < 0.25% measuring range
◊ Repeatability < 0.1µm
◊ 2m screened cable
◊ Screw lock DIN connector
◊ Repairable
Mercer Probe type 410 ±1mm
◊ Total Tip Travel = 2.5mm
◊ Linearity = 0.2µm (over measuring range)
◊ Repeatability = 0.1µm
◊ Short body length, 8mm body diameter with axial or radial cable exit
◊ Designed for use in fixtures where space is limited
◊ Robust construction with chrome plated hardened steel body
◊ Can be clamped over entire body length
◊ Fitted with carbide ball bearing tip and Nitrile sealing boot
◊ Flexible cable exit fitted with steel spring for support
◊ Supplied with 'radial' adaptor
◊ IP62 protection
Mercer Probe type 430 ±0.5mm
◊ Short body length, 8mm body diameter with axial cable exit
◊ Designed for use in fixtures where space is limited
◊ Robust construction with chrome plated hardened steel body
◊ Can be clamped over entire body length
◊ Fitted with carbide ball bearing tip and Nitrile sealing boot
◊ IP62 protection
Mercer Probe type 160 ±1mm
◊ ∅6mm body diameter with axial cable exit
◊ Robust construction with chrome plated hardened steel body
◊ Can be clamped over entire body length
◊ Fitted with carbide ball bearing tip and Viton sealing boot
◊ IP62 protection